RadiusRunnerTool Fillet Accelerator

CATIA V5 tool fillet productivity utility

RadiusRunner

Select a bottom face and automatically identify the corner and bottom edges. Preview the result, choose a saved radius pair, and create the two-stage fillets. Multi-face processing turns repetitive edge recognition and parameter entry into a consistent workflow.

Download for WindowsSee the workflow
  • Version 0.4.0
  • 7-day trial
  • Windows
  • CATIA V5
CORNER R + BOTTOM R
Preview edges, choose an R preset, create fillets

Features

A previewable, reusable workflow for two-stage tool fillets.

Automatic edge detection

Identifies corner and bottom edges from the selected face, combining CATIA topology searches with measurement-based checks.

Preview before creation

Review the detected edges before running the operation. Manual selection remains available when automatic recognition needs adjustment.

Five radius presets

Save frequently used corner and bottom radius pairs, labels, and selection hotkeys.

Sequential or grouped runs

Process multiple bottom faces one at a time or create one grouped corner fillet and one grouped bottom fillet.

Keyboard workflow

Configure sequential, batch, preset-selection, and exit hotkeys to reduce pointer travel.

Independent licensing

RadiusRunner uses its own machine code, TPM binding, and local license service. A 7-day trial is included, and a full license can be imported from the mini panel.

Download

RadiusRunner 0.4.0

Windows installer with a 7-day trial. The trial starts when first initialized on this machine and is not reset by uninstalling or reinstalling. CATIA V5 must already be installed and able to start normally.

SHA256: FFEED43ED36A7383BB58F7E3AE4ED3BD137A9285B7D7E3F5B5625F69251A9E74

If Windows displays an unknown publisher warning, verify that the installer came from this site and matches the SHA256 value above.

Download RadiusRunner_Setup_0.4.0.exe

Workflow

Select the face, confirm the edges, create the fillets.

  1. Select bottom facesSelect one or more target bottom faces in the active CATPart, then run automatic detection.
  2. Preview and choose radiiReview the corner and bottom edge previews, then select the required radius preset.
  3. Create filletsRun sequentially or as a group. RadiusRunner creates the corner fillet followed by the bottom fillet.